Drum, Tote and Tank alarms
Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology
Foolproof liquid level alarms ensure process chemicals never run out or overfill.
Please call for controls / accesories or special applications.
Drum, Tote and Tank Alarms
The TANK ALARM grabs attention with a bright flashing LED and a loud beeper when liquid level is too high or too low. Easy to install. Easy to adjust the depth in tank. Stop overfilled or empty tanks for good!
- Always on duty because it uses uninteruptible battery power. Lasts for years.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments.
- A functional check is simple - just loosen the cord grip and lift the Tank Alarm out.
- Reliable float switch is protected inside a pipe.
- Safe. 9 volt circuit in a waterproof enclosure.
- No wetted metal parts.
- Choice of power. Battery, 12VDC, 24VDC or AC power option.
- Uninterruptible battery power works through power failures, can't come unplugged, or be defeated. And because the Tank Alarms don't use any power until alarming, the batteries last for years. further discussion.
- Easy to adjust the depth of the Tank Level Alarms - just loosen the nut and slide the level alarm to the correct depth. Adapters for any mounting situation. (2" NPT, bolt-on flange, bulkhead feedthrough etc.
- Float is protected inside a pipe. This feature protects the level float so it can't be damaged. Screw-on float guard allows inspection of the float. Optional sreened float guard keeps solids, debris or insects out so they don't foul the float.
- Weatherproof enclosure - NEMA 4X (IP65). High-visiblity beacon LED is clearly visible outdoors.
- Any Depth. Standard level alarm depths available up to 5 ft. Custom depths have been made 20 feet deep.
- Optional circuit board allows different behaviors in addition to testing the circuit such as silencing the buzzer while allowing the LED to continue flashing, a snooze alarm to silence the buzzer temporarily, shutoff mode for filling tanks so the LED and buzzer both turn off until the next fill-up, and low battery monitoring. This is the "silencing button" option.
- Different models
- The PVC tank level alarms have a polypropylene float protected in a PVC pipe, and the screen material is polypropylene. (TH-10)
- Polypropylene models (ex. TH-PP) have all polypropylene parts including piping.
- PVDF (Kynar) models have a reversible float.
- Stainless steel tank level alarms on this page.
- Everything Included - Every unit includes a threaded bushing to adapt the 1" NPT threads for the cord grip to 2" NPT. threads. Lithium battery is included.
Options:
Shutoff Box SH-1
The illuminated button silences buzzer. LED flashes until level is corrected. Resets automatically. Low battery alert.
Silencing Button / Low Battery Alert SL-1
Button silences the audio alarm while LED continues to flash. Resets automatically. Includes a low battery warning. Button also tests the unit.
Relay Output with Cord RL-AC
Switches a relay to control pumps or solenoids. Silences and test alarm. Piggyback plug makes hookup easy.
AC Power Cord C-NA
When plug-in AC power is preferred. Comes with 3 prong plug and 8 foot rubber jacketed cord. Power convertor inside box.
Rim Mount Bracket MB-R
A bracket designed for mounting on open top tanks and containers. 1.3 inch diameter hole accepts adjustable collar.
20 Year Battery B-20
Lithium Thionyl chloride chemistry has a self discharge rate half that of Ultralife LiMNO2 - standby life of 20 years.
Float Screen FS-PP
A top screen will completely enclose the float which allows for reliable operation in liquids containing solids. Also keeps insects out.
PLC Output PLC
A circuit board allows you to select N.C. or N.O. output to your PLC. Includes button to silence buzzer. Includes 10 feet of communications cable.
Wireless Transmitter & Receiver W2
Wireless transmitter inside the level alarm sends a wireless signal to the receiver. Buzzer and relay in receiver.
Siren Alarm Box SA-1
Siren alarm gives an extremely loud signal. Suitable for entire buildings.
Multiconductor Cable C-8
Extra cable length over the standard. Heavy 0.032" jacket for superior durability. Eight stranded conductors x 24 gauge.
Waterproof Screw Lock Connector CN-2
For units with a cable. Makes it easy to connect and disconnect.
Different Buzzer Tones BZ-xx
Different buzzer tones to audibly identify different units. (Chime, Stucatto, Whoop, Beep)
Buzzer Volume Control V-1
Snap-on muffler reduces the volume by 20 dB and anywhere in-between just by rotating the slots.
Alternate Color LED BL-x
Default color is red. Amber, Blue, and Green are in stock. White is a special order.
Product Page:
INTRINSICALLY SAFE TANK LEVEL ALARM alerts if liquid level is high or low with a loud beep. Easy to install with many different mounting adapters. Easy to adjust the depth with no tools. Stop overfilled or empty tanks for good!
- Always on duty because it uses uninteruptible battery power. Lasts for years.
- Install anywhere: battery power is not limited to locations near power outlets No wiring hassle or expense.
- Lithium batteries last for years. (included)
- Loud buzzer is 103dB @ 2 ft. (like a smoke alarm)
- Rugged. Built for rough, wet and corrosive environments. NEMA 4X.
- Safe. Battery Power.
- LED Indicator Light.
- Silencing Switch.
- UL approved Class 1, Div. 1.
- Durable stainless steel construction. Every unit inludes a SS grounding lug. For especially abusive environments there is an optional guard for the float that screws on to protect it from physical damage.
- Easy to install by connecting a single wire internally, and then just mount it on you tank or drum. The depth is adjusted by loosening the nut on the cord grip so the shaft can be slid to the desired length. No tools needed.
- Wetherproof - all NEMA 4X construction. Pipe is sealed in cord grip with a rubber gland.
- Weatherproof enclosure - NEMA 4X (IP65). High-visiblity beacon LED is clearly visible outdoors.
- Depth adjustment is easy: just loosen the cord grip nut and slide the pipe to the proper depth. The 1" NPT cord grip works with many adapters for any mounting situation. (2" NPT, flange, bulkhead feedthrough, tank wall etc.) Float switch is reversible.
- Operation Red alarm light will flash during use for notification to the user. Low battery light indicates when battery needs replacing. Shelf life of the lithium battery is 10 years.
- Stainless Steel OptionsAll wetted parts are type 304 stainless steel. The standard model has a 304 stainless steel float which is 24 mm in diameter. A "screw-on guard" is an available option which allows the alarm to be moved from tank to tank without worry. The float is reversible.
- Cold weather suitable - All components are rated for -40 °C operation.
- Models for drums the 3/4" NPT opening in drums requires a very small-diameter float switch and pipe. The model DHK-IS is designed for this application. Please call to discuss this application.
Options:
Mounting Bracket - Stainless MB-SS
Fastens securely to the side of an open tank or truck opening with SS thumbscrews.
Screw-On Guard FG-SS
For applications where the alarm is frequently removed from tanks or drums the guard prevents damage to the float.
Mounting Options
Adapt from the 1" NPT cord grip.
Welded Plug RB-SS
A 2" stainless steel plug welded to the pipe. Depth is not adjustable.
Product Page:
Downloads:
KNOW IF THE WATER IN YOUR SUMP IS TOO HIGH. Very loud buzzer will be heard in all corners of your plant/house if power fail or if the liquid level is high.
Product Page:
The DRUM ALARM for HIGH LIQUID LEVEL alerts your attention to full drums with a bright flashing LED and a loud beeper when liquid level is high. Just drop it in a drum and never overfill again!
- Always on duty because the liquid feed tube is permanently attached to the alarm unit.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments.
- A functional check is simple - just loosen the cord grip and lift the Tank Alarm out.
- Transfer to a new drum is easy: No need to screw in threads or fiddle around with tube connections, just drop in.
- Safe. 9 volt circuit in a waterproof enclosure.
- No wetted metal parts.
- It can go anywhere because it is battery operated. No need for power outlets.
- Uninterruptible battery power lasts for years.Lithium battery always included.
- The Mounting Cap on the DHL-1 Drum Alarm makes it easy to switch to a new drum when the old one is full since you don't have to disconnect tubing while you unscrew a cap - it just drops over the bung. The cap keeps debris out of the drum, and suppresses vapors even liquid ammonium hydroxide is not a problem.
- Attached Feed Tube on the DHL-1 Drum Alarm makes sure the alarm stays with the alarm. Your tubing is secured with a foolprooof all-polypropylene compression fitting to eliminate chance of spillage due to hose disconnection.
- Float is protected inside a rigid pipe so it can get knocked around without worry. Screen protects float from debris on model DHL-1.
- Uninterruptible battery power works through power failures, can't come unplugged, or be defeated. And because the Tank Alarms don't use any power until alarming, the batteries last for years. further discussion.
- Any Depth. Standard level alarm depths available up to 5 ft. Custom depths have been made 20 feet deep.
- Different Materials: PVC, Polypropylene, PVDF, Stainless Steel.
- Different models
- DHL-1 includes a 1/2" PVC liquid feed pipe to pump liquid into a drum. The cap slips over a standard 2" drum bung. Alarm depth is fixed at 1" below top of the drum. Polypropylene float and PVC pipe.
- DHA-5 liquid feed pipe and a cap like the DHL-1 but depth can be adjusted with a thumbscrew from 1-5". Polypropyelene wetted parts. (float and pipe)rew. Polypropyplene wetted parts. (float and pipe).
- DHP-7 has a liquid pipe and mounts on the drum with a 2" NPS threaded plug. Working depth is adjustable from 1-7 inches using a thumbscrew. Polypropylene wetted parts.
- DHK-7 is an alarm only and does not have a liquid pipe. Mounts on the drum in the 3/4" threaded bung. Can be adjusted from 2" to 7" maximum depth from the top. All polypropylene wetted parts.
- DHQ-7 is an alarm only with no liquid pipe. Mounts on a drum using a 2 inch NPS plug. (the fine threads) Depth adjustment from 2-7 inches from the top. Polypropylene wetted parts. Can be adapted to the coarse threads with a buttress adapter. (see options)
- Everything Included - Every unit includes a threaded bushing to adapt the 1" NPT threads for the cord grip to 2" NPT. threads. Lithium battery is included.
Options:
Shutoff Box SH-1
The illuminated button silences buzzer. LED flashes until level is corrected. Resets automatically. Low battery alert.
Silencing Button / Low Battery Alert SL-1
Button silences the audio alarm while LED continues to flash. Resets automatically. Includes a low battery warning. Button also tests the unit.
Relay Output with Cord RL-AC
Switches a relay to control pumps or solenoids. Silences and test alarm. Piggyback plug makes hookup easy.
AC Power Cord C-NA
When plug-in AC power is preferred. Comes with 3 prong plug and 8 foot rubber jacketed cord. Power convertor inside box.
Rim Mount Bracket MB-R
A bracket designed for mounting on open top tanks and containers. 1.3 inch diameter hole accepts adjustable collar.
Beacon LED BL-x
Higher visibility strobing light illuminates when a cycle is over. Colors: Red, Blue, Amber, and Green.
Check Valve CV-V
Optional check valve for use with diaphragm pumps. Stops the liquid from draining out of the feed pipe during transfer to a new container. Eliminates re-priming pump.
PLC Output PLC
A circuit board allows you to select N.C. or N.O. output to your PLC. Includes button to silence buzzer. Includes 10 feet of communications cable.
Wireless Transmitter & Receiver W2
Wireless transmitter inside the level alarm sends a wireless signal to the receiver. Buzzer and relay in receiver.
Siren Alarm Box SA-1
Siren alarm gives an extremely loud signal. Suitable for entire buildings.
Different Buzzer Tones BZ-xx
Different buzzer tones to audibly identify different units. (Chime, Stucatto, Whoop, Beep)
Waterproof Screw Lock Connector CN-2
For units with a cable. Makes it easy to connect and disconnect.
Buzzer Volume Control V-1
Snap-on muffler reduces the volume by 20 dB and anywhere in-between just by rotating the slots.
Product Page:
The DRUM ALARM for LOW LIQUID LEVEL alerts your attention to empty drums with a bright flashing LED and a loud beeper when liquid level is low. Just drop it in a drum and never run out again!
- Always on duty because the liquid feed tube is permanently attached to the alarm unit.
- It can go anywhere because it is battery operated. No need for power outlets.
- Uninterruptible battery power lasts for years.Lithium battery always included.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments.
- Transfer to a new drum is easy: No need to screw in threads or fiddle around with tube connections, just drop in.
- Protects your Pumps from debris with an intake screen.
- Flow Indicator built in.
- MONITOR LIQUID LEVEL IN DRUMS when feeding from chemical drums and containers. Quick and easy to install - then forget about drum level forever. Simply connect your liquid suction line and drop it in a drum. You're ready to go!
- The Mounting Cap on the Drum Alarm makes it easy to switch to a new drum since you don't have to disconnect tubing while you unscrew a cap - it just drops over the bung. The cap keeps debris out of the drum, and suppresses vapors even liquid ammonium hydroxide is not a problem.
- Attached Suction Pipe can't be separated from the float switch, so the level alarm is always on duty.
- Removable Filter Screenguards your pumps from debris or crystals.
- Float switch is protected inside a rigid pipe so it can get knocked around without worry.
- Secure compression tubing connection eliminates air leakage in your feed lines.
- The Built-in Suction Pipe depth is perfectly sized to reach the bottom of the drum to pump out all of the liquid. Because it is a rigid pipe, it always
draws from the bottom and your pump will never be drawing air instead of liquid.
- Different models
- Polypropylene float is standard on all models. Pipe can be PVC or polypropylene piping. All-PVDF models also an option.
- Drum alarms come with or without acrylic flowmeter, or suction pipe.
- Standard models slip over the 2" bung, and there are also models to screw into the threaded bung.
- DLA-PP Same as above but has polypropylene pipe. Adjustable (white) lid slips over drum bung.
- DLAX-PP Adjustable lid like above but no flowmeter.
- DLAX-KY Adjustable lid like above but Kynar (PVDF) wetted parts.
- DLP Float switch alarm pipe and suction pipe. Threaded plug screws into 2" NPS bung. Polypropylene wetted parts.
- DLK Float switch alarm without suction pipe screws into a 3/4" bung. Depth is adjustable with a thumbscrew. Fits drums up to 55 gallons. Polypropylene wetted parts.
- DLQ Same as DLK but fits a 2" NPS bung. Polypropylene wetted parts.
- If you don't see the model you need, we'll gladly customize it for you! Please contact us.
Options:
Shutoff Box SH-1
The illuminated button silences buzzer. LED flashes until level is corrected. Resets automatically. Low battery alert.
Silencing Button / Low Battery Alert SL-1
Button silences the audio alarm while LED continues to flash. Resets automatically. Includes a low battery warning. Button also tests the unit.
Relay Output with Cord RL-AC
Switches a relay to control pumps or solenoids. Silences and test alarm. Piggyback plug makes hookup easy.
AC Power Cord C-NA
When plug-in AC power is preferred. Comes with 3 prong plug and 8 foot rubber jacketed cord. Power convertor inside box.
Alternate Color LED BL-x
Default color is red. Amber, Blue, and Green are in stock. White is a special order.
Beacon LED BL-x
Higher visibility strobing light illuminates when a cycle is over. Colors: Red, Blue, Amber, and Green.
Check Valve CV-V
Optional check valve for use with diaphragm pumps. Stops the liquid from draining out of the feed pipe during transfer to a new container. Eliminates re-priming pump.
PLC Output PLC
A circuit board allows you to select N.C. or N.O. output to your PLC. Includes button to silence buzzer. Includes 10 feet of communications cable.
Wireless Transmitter & Receiver W2
Wireless transmitter inside the level alarm sends a wireless signal to the receiver. Buzzer and relay in receiver.
Siren Alarm Box SA-1
Siren alarm gives an extremely loud signal. Suitable for entire buildings.
Different Buzzer Tones BZ-xx
Different buzzer tones to audibly identify different units. (Chime, Stucatto, Whoop, Beep)
Waterproof Screw Lock Connector CN-2
For units with a cable. Makes it easy to connect and disconnect.
Buzzer Volume Control V-1
Snap-on muffler reduces the volume by 20 dB and anywhere in-between just by rotating the slots.
Drum Wedge DW-1
Draw all of the liquid out of your drum. Tip drum to collect liquid around Drum Alarm intake.
Weighted Pipe WP-1
Dense chemicals such as sulfuric or phosphoric acid cause the drum alarm to partially float out of solution when the drum is full. Steel shot sealed in the float pipe keeps it down.
Product Page:
The IBC TANK HIGH LEVEL ALARM is supplied with a cap to fit an intermediate bulk container (or tote tank). When liquid level is high, a bright flashing LED and a loud beeper alerts personnel. Battery powered so no wires to install. Never overfill again!
- Always on duty
- It can go anywhere because it is battery operated. No need for power outlets.
- Uninterruptible battery power lasts for years.Lithium battery always included.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments.
- Safe. 9 volt circuit in a waterproof enclosure.
- No wetted metal parts.
- A functional check is simple - convienient button for testing.
- Uninterruptible battery power works through power failures, can't come unplugged, or be defeated. And because the Tank Alarms don't use any power until alarming, the batteries last for years. A low battery alert is an option.
- Float switch is protected inside a rigid pipe so it can get knocked around without worry. Optional screen protects float from debris.
- Adjustable Depth. Simply loosen the cord grip to slide the pipe to correct depth. Standard maximum depth is 10" and this can be adjusted to 1" if desired.
- Because the liquid pipe and the alarm are integrated into the same unit, the level alarm is always on duty.
- IBC Alarms come in all different materials for all different chemistries:
- PVC
- Polypropylene
- PVDF
- All constructions are built for rugged industrial envirnoments
- Different models
- IHK-PP-10 polypropylene float switch and pipe mounted in an adjustable collar. No feed pipe.
- IHK-KY-10 is the same as above but has PVDF pipe and float so all wetted materials are PVDF.
- IHP-PP-10 has a 3/4" pipe to feed liquid into the tank. Feed pipe and alarm mounted in a 2" NPT plug throught the IBC lid.
- IHP-KY-10 is the same but has PVDF pipe and float so all wetted materials are PVDF.
Options:
Shutoff Box SH-1
The illuminated button silences buzzer. LED flashes until level is corrected. Resets automatically. Low battery alert.
Silencing Button / Low Battery Alert SL-1
Button silences the audio alarm while LED continues to flash. Resets automatically. Includes a low battery warning. Button also tests the unit.
Relay Output with Cord RL-AC
Switches a relay to control pumps or solenoids. Silences and test alarm. Piggyback plug makes hookup easy.
AC Power Cord C-NA
When plug-in AC power is preferred. Comes with 3 prong plug and 8 foot rubber jacketed cord. Power convertor inside box.
Tank Vent Cap VC-1/2
Vent cap installed on lid allows more air exchange for high flowrates. Screen keeps out debris.
Cam-Lock and Vent CL-2
Fill your IBC tank with a 2" male cam-lock polypropylene plug.
Waterproof Screw Lock Connector CN-2
For units with a cable. Makes it easy to connect and disconnect.
PLC Output PLC
A circuit board allows you to select N.C. or N.O. output to your PLC. Includes button to silence buzzer. Includes 10 feet of communications cable.
Wireless Transmitter & Receiver W2
Wireless transmitter inside the level alarm sends a wireless signal to the receiver. Buzzer and relay in receiver.
Siren Alarm Box SA-1
Siren alarm gives an extremely loud signal. Suitable for entire buildings.
Different Buzzer Tones BZ-xx
Different buzzer tones to audibly identify different units. (Chime, Stucatto, Whoop, Beep)
Buzzer Volume Control V-1
Snap-on muffler reduces the volume by 20 dB and anywhere in-between just by rotating the slots.
Product Page:
Downloads:
The IBC TANK LEVEL ALARM is supplied with a cap to fit an intermediate bulk container. (tote tank) Liquid is fed to your process through a tube and flowmeter. When liquid level gets low, a bright flashing LED and a loud beeper alerts. Never run empty again!
- Always on duty because the liquid tube is permantly attached to the alarm unit.
- It can go anywhere because it is battery operated. No need for power outlets.
- Uninterruptible battery power lasts for years.Lithium battery always included.
- Loud warbling tone cuts through the loudest industrial noise.
- Rugged. Built for rough, wet and corrosive environments.
- Protects your pumps from debris with an intake screen.
- Flow indicator built into low level units.
- No wetted metal parts.
- Uninterruptible battery power works through power failures, can't come unplugged, or be defeated. And because the Tank Alarms don't use any power until alarming, the batteries last for years.
- Float switch is protected inside a rigid pipe so it can get knocked around without worry. Optional screen protects float from debris.
- Adjustable Depth. to fit any size tote. Simply loosen the set screws to slide pipes to correct depth up to 50 inches. (Standard Mauser 330 gallon IBC has a depth of 48.5".
- The feed tube is permanantly attached to the float switch, so the level alarm is always on duty.
- Removable filter screen on the suction pipe guards your pumps from debris or crystals. A replaceable check valve can be easily inserted in-line to prevent liquid from draining when transferring to new containers if needed.
- IBC Alarms come in different materials for many different chemistries:
- PVDF
- Polypropylene (standard)
- Polypropylene models have polypropylene floats, and polypropyelene piping so all wetted parts are polypropylene except the Acrylic flow indicator and glass ball. If Acrylic is incompatible there are models available without the flow indicator.
- Stainless upon request
- All constructions are built for rugged industrial envirnoments
- Standard Models Available:
- ILP-PP - polypropylene wetted parts with liquid suction pipe and acrylic flowmeter. Includes 6 inch buttress thread lid.
- ILPX-PP - same as above but no flow indicator.
- ILK-PP - no liquid suction pipe. (level alarm part only).
- PVDF (Kynar) models have the suffix KY instead of PP.
Options:
Shutoff Box SH-1
The illuminated button silences buzzer. LED flashes until level is corrected. Resets automatically. Low battery alert.
Silencing Button / Low Battery Alert SL-1
Button silences the audio alarm while LED continues to flash. Resets automatically. Includes a low battery warning. Button also tests the unit.
Relay Output with Cord RL-AC
Switches a relay to control pumps or solenoids. Silences and test alarm. Piggyback plug makes hookup easy.
AC Power Cord C-NA
When plug-in AC power is preferred. Comes with 3 prong plug and 8 foot rubber jacketed cord. Power convertor inside box.
Tank Vent Cap VC-1/2
Vent cap installed on lid allows more air exchange for high flowrates. Screen keeps out debris.
Check Valve CV-V
Optional check valve for use with diaphragm pumps. Stops the liquid from draining out of the feed pipe during transfer to a new container. Eliminates re-priming pump.
Waterproof Screw Lock Connector CN-2
For units with a cable. Makes it easy to connect and disconnect.
PLC Output PLC
A circuit board allows you to select N.C. or N.O. output to your PLC. Includes button to silence buzzer. Includes 10 feet of communications cable.
Wireless Transmitter & Receiver W2
Wireless transmitter inside the level alarm sends a wireless signal to the receiver. Buzzer and relay in receiver.
Siren Alarm Box SA-1
Siren alarm gives an extremely loud signal. Suitable for entire buildings.
Different Buzzer Tones BZ-xx
Different buzzer tones to audibly identify different units. (Chime, Stucatto, Whoop, Beep)
Buzzer Volume Control V-1
Snap-on muffler reduces the volume by 20 dB and anywhere in-between just by rotating the slots.
Alternate Color LED BL-x
Default color is red. Amber, Blue, and Green are in stock. White is a special order.
Slip-On Cap IBC-SC
A regular IBC lid with the threads taken off so it slips on and doesn't need to be screwed on for fast tank changes.
