Tolber Masking and Stop-Off Lacquers distributed by CDI

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

New, Safer, Environmentally Friendly Lacquer Strippers, Paint Removers, and Wax Removers.

All lacquers are available in low VOC and VOC free form.

Please call for special applications.

Miccro-Brand Stop-Off Lacquers

Miccro XP-2000

Peelable stop-off formulated specifically for electroless nickel, hard coat anodizing and chemical milling. Dip or brush from the shipping container.

Miccro XP-2000 is a butyl rubber compound suitable for use in the following cycles:

  • Electroless Nickel Plating
  • Chemical Milling
  • Hard Coat Anodizing
  • Acid Solutions in General

Characteristics:

  • Color: Orange
  • Viscosity: 5000-6000 cps
  • Coverage Rate: Approximately 130 square feet (12 m2) per gallon, 12 mil dry film.
  • Weight per Gallon: 7.90 pounds / gallon
  • Flashpoint: 24° F. TCC
  • XP-2000 is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro XP-2000LR Chromate Free

Peelable stop-off formulated specifically for electroless nickel, hard coat anodizing and chemical milling. Dip or brush from the shipping container.

Miccro XP-2000LR is a butyl rubber compound suitable for use in the following cycles:

  • Electroless Nickel Plating
  • Chemical Milling
  • Hard Coat Anodizing
  • Acid Solutions in General

Characteristics:

  • Color: Red
  • Viscosity: 5000-6000 cps
  • Coverage Rate: Approximately 130 square feet (12 m2) per gallon, 12 mil dry film.
  • Weight per Gallon: 7.90 pounds / gallon
  • Flashpoint: 24° F. TCC
  • XP-2000LR is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro XP-400 Low VOC (less than 250 grams/liter)

Miccro XP-400 is a compound suitable for use in the following cycles:

  • Electroless Nickel
  • Hard Coat Anodizing
  • Chemical Milling
  • Acid Solutions in General

Characteristics:

  • Color: Brown
  • Viscosity: 5000-6000 cps
  • Coverage Rate: Approximately 130 ft2 (12 m2) per gallon
  • Weight per Gallon: 9.8 pounds / gallon
  • Flashpoint: 24 °F TCC
  • Dry Film: 1 mil
  • XP-400 is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro XP-410 VOC Free

Miccro XP-410 is a compound suitable for use in the following cycles:

  • Electroless Nickel
  • Hard Coat Anodizing
  • Chemical Milling
  • Acid Solutions in General

Characteristics:

  • Color: Orange
  • Viscosity: 5000-6000 cps
  • Coverage Rate: Approximately 130 ft2 (12 m2) per gallon
  • Weight per Gallon: 10.96 pounds / gallon
  • Flashpoint: 109 °F TCC
  • Dry Film: 1 mil
  • XP-410 is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro SH-100 Low VOC (Less than 250 grams/liter)

Miccro SH-100 is a compound suitable for use in the following cycles:

  • Electropolishing
  • Electroless Nickel
  • Anodizing
  • Nuetral and Acid Gold
  • Bronze
  • Palladium
  • Any Acid Cycle
  • Silver
  • Indium
  • Rhodium
  • Chrome

Characteristics:

  • Color: Orange
  • Viscosity: 45-50 sec (#2 Zahn)
  • Weight per Gallon: 7.9 pounds / gallon
  • Flashpoint: 30 °F TCC
  • SH-100 is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro SH-110 VOC Free

Miccro SH-110 is a compound suitable for use in the following cycles:

  • Electropolishing
  • Electroless Nickel
  • Anodizing
  • Nuetral and Acid Gold
  • Bronze
  • Palladium
  • Any Acid Cycle
  • Silver
  • Indium
  • Rhodium
  • Chrome

Characteristics:

  • Color: Orange
  • Viscosity: 45-50 sec (#2 Zahn)
  • Weight per Gallon: 7.39 pounds / gallon
  • Flashpoint: 30 °F TCC
  • SH-100 is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro ST-200 Low VOC (Less than 250 grams/liter)

Miccro ST-200 is a compound suitable for use in the following cycles:

  • High Speed Copper
  • Tin
  • Nickel
  • Chrome (Decorative)
  • Zinc
  • Cadmium
  • Phosphate Coatings
  • Gold
  • Gold on Silver
  • Silver
  • Silver on Gold
  • Alloy Coatings
  • Heavy Deposit Industrial Chrome

Characteristics:

  • Color: Red
  • Viscosity: 32-37 sec (#2 Zahn)
  • Weight per Gallon: 7.5 pounds / gallon
  • Flashpoint: 24 °F TCC
  • Coverage Rate: Approximately 500 ft2 (46 m2) per gallon
  • Dry Film: 1 mil
  • ST-200 is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro ST-210 VOC Free

Miccro ST-210 is a compound suitable for use in the following cycles:

  • High Speed Copper
  • Tin
  • Nickel
  • Chrome (Decorative)
  • Zinc
  • Cadmium
  • Phosphate Coatings
  • Gold
  • Gold on Silver
  • Silver
  • Silver on Gold
  • Alloy Coatings
  • Heavy Deposit Industrial Chrome

Characteristics:

  • Color: Red
  • Viscosity: 32-37 sec (#2 Zahn)
  • Weight per Gallon: 7.49 pounds / gallon
  • Flashpoint: 24 °F TCC
  • Coverage Rate: Approximately 500 ft2 (46 m2) per gallon
  • Dry Film: 1 mil
  • ST-200 is available in: 1, 5, and 55 gallon containers.

Product Page:

MiccroShield

A General-Purpose Stop-Off Lacquer for most Plating Cycles.

MiccroShield a high-solids, air-dry lacquer, transparent orange/red in color, that can be applied by brushing, dipping or spraying if diluted properly.

MiccroShield is suitable for use in the following cycles:

  • Electropolishing.
  • Electroless Nickel.
  • Neutral and Acid Gold Palladium.
  • Indium Rhodium.
  • Anodizing Bronze.
  • Any Acid Cycle Silver.
  • Chrome.

Characteristics:

  • Color: Transparent Orange / Red
  • Viscosity: 45-50 seconds #2 Zahn
  • Coverage Rate: Approximately 510 square feet (47.4 m2) per gallon, 1.1 mil dry film.
  • Weight per Gallon: 7.90 pounds / gallon
  • Flashpoint: 30° F. TCC
  • MiccroShield is available in: 1, 5, and 55 gallon containers.

Product Page:

MiccroStop

A Durable Stop-Off Lacquer for Precious Metal Plating.

MiccroStop is suitable for use in the following cycles:

  • High-Speed Copper Tin.
  • Chrome (Decorative) Zinc.
  • Phosphate Coatings Gold.
  • Alloy Coatings Silver.
  • Heavy Deposit Industrial Chrome.
  • Nickel, Cadmium, Gold on Silver, Silver on Gold.

Characteristics:

  • Color: Transparent Red
  • Viscosity: 32-37 seconds #2 Zahn
  • Coverage Rate: Approximately 500 square feet (46 m2) per gallon, 1.0 mil dry film.
  • Weight per Gallon: 7.50 pounds / gallon
  • Flashpoint: 24° F. TCC
  • MiccroStop is available in: 1, 5, and 55 gallon containers.

Product Page:

MiccroMask

A Lacquer for Hard Chrome Applications.

MiccroMask is suitable for use in the following cycles:

  • Hard Chrome Plating.

Characteristics:

  • Color: Light Red
  • Viscosity: 2200-2500 cps
  • Coverage Rate: Approximately 280 square feet (26 m2) per gallon, 2.0 mil dry film.
  • Weight per Gallon: 7.61 pounds / gallon
  • Flashpoint: 45° F. TCC
  • MiccroMask is available in: 1, 5, and 55 gallon containers.

Product Page:

MiccroWax C-562 Selective

A Reusable Coating for Hard Chrome Plating.

Benefits:

  • MiccroWax is a single-material wax for selective stop-off that is especially suited for masking on complicated parts and sharp edges.
  • MiccroWax will not crack, and may be readily melted for use by any common heating medium.
  • MiccroWax shows a remarkable degree of adhesion, even when used on flat surfaces. It requires no prime coat before application which means only one dip tank is necessary for the complete operation.
  • MiccroWax hardens immediately after the part is dipped, thereby minimizing preparation time and speeding production of parts before plating.
  • MiccroWax can be reused without loss of its efficiency.
  • MiccroWax may be used in most plating cycles as long as cycle temperatures do not exceed the melting point of the wax.
  • MiccroWax may be used in the following types of plating: Hard Chrome Indium Copper Acid Lead Copper Pyro Silver

Characteristics:

  • Weight per Gallon: 7.8 pounds / gallon (When melted)
  • MiccroWax is available in: 10 pound cakes, 5 cakes per carton.

Product Page:

MiccroWax C-565 Selective High Temperature

A Reusable Coating for Hard Chrome, Indium, Copper Acid, Lead, Copper Pyro, Silver.

Benefits:

  • MiccroWax is a single-material wax for selective stop-off that is especially suited for masking on complicated parts and sharp edges.
  • MiccroWax will not crack, and may be readily melted for use by any common heating medium.
  • MiccroWax shows a remarkable degree of adhesion, even when used on flat surfaces. It requires no prime coat before application which means only one dip tank is necessary for the complete operation.
  • MiccroWax hardens immediately after the part is dipped, thereby minimizing preparation time and speeding production of parts before plating.
  • MiccroWax can be reused without loss of its efficiency.
  • MiccroWax may be used in most plating cycles as long as cycle temperatures do not exceed the melting point of the wax.
  • MiccroWax may be used in the following types of plating: Hard Chrome Indium Copper Acid Lead Copper Pyro Silver

Characteristics:

  • MiccroWax is available in: is available in: 6 slabs per carton. Approximate weight is 65.5 pounds per carton.

Product Page:

MiccroPeel

A Good General Purpose Lacquer.

MiccroPeel is suitable for use in the following cycles:

  • Hard Chrome Plating.
  • Bright Chrome.
  • Nickel.

Characteristics:

  • Color: Green
  • Viscosity: 200-250 cps
  • Coverage Rate: Approximately 280 square feet (26 m2) per gallon, 5.0 mil dry film.
  • Weight per Gallon: 7.9 pounds / gallon
  • Flashpoint: 24° F. TCC
  • MiccroPeel is available in: 1, 5, and 55 gallon containers.

Product Page:

Miccro-Brand Strippers and Reducers

Miccro Safe-Strip "C" Non-Flammable

Environmentally-Preferred, Non-flammable remover for MiccroStop, MiccroShield, and MiccroPeel.

Safe Strip "C" is an environmentally-preferred, non-flammable material designed for the removal of Stop-off Lacquers. It is also a cured paint and cured resin solvent. This product is an effective replacement for acetone, methyl ethyl ketone or the chlorinated solvents that have been used to remove the Stop-off Lacquers. It can also replace methylene chloride, toluene, benzene and other hazardous solvents traditionally used for paint clean-up and paint removal. It has a much lower Inhalation Hazard Index than MEK, making it a safer chemical to use in commercial and industrial applications. It is not an ozone depleter.

Product Page:

Miccro Safe-Strip "D"

Masking Wax Removal without Vapor Degreasers or Hazardous Solvents.

Miccro Safe-Strip "D" is specifically designed for removing high-melting solids such as waxes, pitches, greases, fixturing compounds and buffing compounds. Its high flash point and low odor make it ideal for use in applications where elevated temperatures aid in soil removal. Miccro Safe-Strip "D" is particularly effective for removing masking waxes used in metal plating operations and waxes, pitches, and thermoplastics used as fixturing agents in the optics, wafer, and jet engine industries. Miccro Safe-Strip "D" is also effective for removing most common metalworking soils including oils, greases, lubricants, coolants, and dye penetrants.

Product Page:

Miccro Safe-Strip "F"

Environmentally Preferred, Non-flammable Remover for WB-018 and general purpose paint remover.

Safe Strip "F" is an environmentally preferred, non-flammable material designed for the removal of Stop-off Lacquers. It is also a cured paint and cured resin solvent. This product is an effective replacement for acetone, methyl ethyl ketone or the chlorinated solvents that have been used to remove the Stop-off Lacquers. It can also replace methylene chloride, toluene, benzene and other hazardous solvents traditionally used for paint clean-up and paint removal. It has a much lower Inhalation Hazard Index than MEK, making it a safer chemical to use in commercial and industrial applications. It is not an ozone depleter.

MiccroStrip "A" Flammable

Solvent stripper designed for easy removal of stop-off lacquers.

  • MiccroStrip "A" is specifically designed for the removal of Stop-off Lacquers. The items to be stripped should be fully immersed in MiccroStrip "A" at room temperature for a period of time long enough to dissolve or soften the lacquer to the extent that it can be removed with a soft bristle brush.
  • MiccroStrip "A" should never be used as a lacquer thinner.
  • MiccroStrip "A" is a volatile solvent. Operotors should therefore be cautioned against handling this material without proper safety equipment. In the event it is splashed in the eyes, wash immediately with water and consult with medical personnel as soon as possible. Adequate ventilation should be provided to prevent excessive inhalation of vapors. This material should be stored in a cool place.
  • WARNING: Flammable. Keep away from open fire.

Product Page:

Hot Dip Plastisol Primers

T-100 Plastisol Primer

Formulated to achieve optimum adhesion under a wide range of application conditions when used in conjunction with Miccro Plastisols.

T-100 is a clear primer adhesive formulated to achieve optimum adhesion under a wide range of application conditions when used in conjunction with Plastisol. In addition to being an excellent general purpose primer, it is especially resistant to hot alkaline solutions.

T-100 has been formulated to comply with the solvent requirements of Rule 66 of the Los Angeles Air Pollution Control District and Regulation 3 of the San Francisco Bay Area Air Pollution Control District.

Characteristics:

  • Color: Clear to Pale Yellow
  • Viscosity: 31 seconds #1 Zahn
  • Coverage Rate: Approximately 380 square feet (35.3 m2) per gallon, 0.3 mil.
  • Weight per Gallon: 7.1 pounds / gallon
  • Flashpoint: 43° F. TCC
  • Solids: 16% by weight
  • T-100 Plastisol Primer is available in: 1, 5, and 55 gallon containers.

Product Page:

Hot Dip Plastisol Repair

MiccroPatch MC-753 / MC-967

An Air-Dry Patch for Plastisol Coatings.

Miccropatch MC-753 (Air-Dry, Black) is especiolly designed to allow easy and reliable repair of plastisol coatings. It is quick drying and its high viscosity reduces the need for multiple coats. Plating racks can be returned to service with minimum down time. Properly applied, MiccroPatch forms a tough bond with plastisol and extends insulation life indefinitely. Miccropatch MC-753 (Air-Dry, Black) is made of the same essential ingredients as Plastisol. It is resistant to all plating solutions, alkaline cleaners at boiling temperatures, and acids. MiccroPatch is also available in Green (MC-967).

Product Page:

Hot Dip Plastisol Rack Coatings

MiccroTex Air Dry Rack Coating

An Air-Dry, Chemical Resistant Rack Coating.

MiccroTex Air-Dry Rack Coating is a superior thermoplastic insulating material developed and manufactured to be highly resistant to all plating solutions, acids, and alkaline cleaners at boiling temperatures. MiccroTex is a black, shiny surfaced material that, when properly applied, is tough, resilient and flexible. MiccroTex attains maximum adhesion without depending upon shrinkage. It is unaffected by any solution commonly used in plating and anodizing cycles, including the electrolytic, sulfuric acid strip used to dissolve nickel.

Product Page:

Miccro Brand Tapes

MiccroTape

Black, vinyl extruded tape for use in most plating cycles. Metal and Powder Coating tapes are also available.

Characteristics:

  • Color: Black.
  • Tapered Edges.
  • Thickness: Varies between 0.012 and 0.005
  • Width: 3/4 inch.
  • Length: 170 feet per roll.
  • Maximum Temperature: 190° F.
  • Adhesion: No adhesion. MiccroTape Cement provides for sealing ends when baking or fusion is not possible. 1/2 ounce tube included with each roll.
  • Excellent for most plating cycles and plating racks.
  • Not recommended for Chlorinated Solvents.

Product Page:

MiccroTape 1210 Yellow

Designed for electroless nickel, type II and III anodizing, chemical milling, abrasive blasting. Used in cycle temperatures from 15-180° F.

Characteristics:

  • Color: Yellow.
  • Thickness: Varies between 5-1/2 and 6 mil.
  • Width: Available in 1 inch and 2 inch rolls.
  • Length: 166 feet per roll.
  • Flexibility: Will conform to a straight edge without undercutting.
  • Adhesion: Excellent self-adhesive abilities for electroless nickel, type II and III anodizing, chemical milling, abrasive blasting.
  • Virtually all plating solutions from 150-210° F.
  • Do not stretch on a flat surface.

Product Page:

MiccroTape 1220 Green

Excellent self-adhesive abilities for high temperature (220° F +) plating cycles.

Characteristics:

  • Color: Green.
  • Thickness: 7 mil.
  • Width: Available in 1 inch and 2 inch rolls.
  • Length: 180 feet per roll.
  • Flexibility: Not recommended for flexing.
  • Adhesion: Excellent self adhesive abilities for high temperature (220 F° +) electroless nickel plating.
  • Very little or no residue when removed.

Product Page: