Process Technology Logo

Distributed by:

CDI Equipment Division logo

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

SmartOne S13 Series, Triple Metal Over the Side Heaters

3mots smartone
Watts Volts Hot Zone
In./(mm)		 OA Length
In./(mm)		 304 SS 316 SS Titanium Ship Weight
Lbs./(kg)
3000 200-240 7 (180) 11 (280) S13F3211 S13S3211 S13T3211 21 (9.5)
6000 200-240 13 (330) 17 (430) S13F6217
 S13S6217 S13T6217
 30 (13.6)
9000 200-240 18 (460) 23 (585) S13F9223 S13S9223 S13T9223 33 (15)
12000 200-240 24 (610) 29 (735) S13F12229
 S13S12229 S13T12229 39 (17.7)
15000 200-240 30 (760) 35 (890) S13F15235
 S13S15235 S13T15235 45 (20.4)
18000 200-240 35 (890) 41 (1040) S13F18241
 S13S18241 S13T18241 51 (23.1)
2400 380-480 7 (180) 11 (280) S13F2.4411 S13S2.4411 S13T2.4411 21 (9.5)
4800 380-480 13 (330) 17 (430) S13F4.8417 S13S4.8417 S13T4.8417 30 (13.6)
7200 380-480 18 (460) 23 (585) S13F7.2423
 S13S7.2423 S13T7.2423 33 (15)
9600 380-480 24 (610) 29 (735) S13F9.6429
 S13S9.6429 S13T9.6429 39 (17.7)
12000 380-480 30 (760) 35 (890) S13F12435
 S13S12435 S13T12435 45 (20.4)
14400 380-480 35 (890) 41 (1040) S13F14.4441 S13S14.4441 S13T14.4441 51 (23.1)
16800 380-480 41 (1040) 47 (1195) S13F16.8447 S13S16.8447 S13T16.8447 70 (31.8)
Three phase standard, insert "-1" for single phase. Note: Should be installed with C or D rated branch fusing.

Features and Benefits

LONG ELEMENT LIFE:
  • Patented PTC heater element lasts longer than conventional heaters.
  • Will not burn out if run in air.
  • Will not burn out due to scale or sludge buildup.

SAFE DESIGN:
  • Heater self limits its maximum operating temperature to 482° F (250° C). This is lower than the ignition point of most plastics.
  • Will not melt tanks when a 1/2" (12mm) minimum distance is maintained.
  • Overtemperature protection devices are not required.
  • Safety is built-in, not added on.
  • Metal-grounded construction (earth ground).
  • Non-floating construction.

SIZES: 2,400 watts (2.4kW) to 18,000 watts (18kW).

VOLTAGES::
  • Three voltage ranges available: 100-120 volt, 200-240 volt, and 380-480 volt.
  • Heater is available in single or three phase power.

CORROSION RESISTANT HEADS: Vapor resistant, flame retardant polypropylene terminal enclosures each with 3-foot (.9m) flexible PVC liquid tight conduits.

OUTSTANDING PERFORMANCE:
  • Watt densities of 26 watts per square inch (4 watts/cm2) ensure long service life.
  • Auto-stabilizing solid state element prevents hot spots and ensures uniform heating.
  • Heater derates itself in highly viscous and high temperature solutions. Consult factory for sizing assistance.

CHEMICALLY RESISTANT:
For use in most aqueous alkaline, electroplating and rinse solutions. Check our Solution Guide or with your chemical supplier for recommended sheath material. Available in:
  • 304 stainless steel
  • 316 stainless steel
  • Titanium

CERTIFICATIONS: cULus and CE.

Consult factory for the following:

  • Individual, single element heaters each with its own junction box and wire and conduit.
  • Longer wire and conduit lengths.
  • Extended cold zones.
  • Temperature and level controls sized to match the heater.

We recommend temperature controls and level controls for use with this immersion heater.

Downloads: