Process Technology Logo

Distributed by:

CDI Equipment Division logo

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

Immersion Heaters: 3V Series, Triple Metal Deep Tank Heater

3V Series, Triple Metal Deep Tank Heater
WATTS VOLTS HOT ZONE in./(mm) STEEL
Model Number
304 SS
Model Number
316 SS
Model Number
Titanium
Model Number
SHIP WT. Lbs./(kg)
18000 240 30 (760) 3VP18236-** 3VF18236-** 3VS18236-** 3VT18236-** 70 (32)
18000 480 30 (760) 3VP18436-** 3VF18436-** 3VS18436-** 3VT18436-** 70 (32)
24000 240 37 (940) 3VP24244-** 3VF24244-** 3VS24244-** 3VT24244-** 75 (34)
24000 480 37 (940) 3VP24444-** 3VF24444-** 3VS24444-** 3VT24444-** 75 (34)
27000 480 44 (1120) 3VP27450-** 3VF27450-** 3VS27450-** 3VT27450-** 80 (36)
30000 480 49 (1245) 3VP30455-** 3VF30455-** 3VS30455-** 3VT30455-** 87 (40)
36000 480 58 (1475) 3VP36464-** 3VF36464-** 3VS36464-** 3VT36464-** 100 (46)
45000 480 66 (1675) 3VP45472-** 3VF45472-** 3VS45472-** 3VT45472-** 120 (55)
48000 480 70 (1780) 3VP48476-** 3VF48476-** 3VS48476-** 3VT48476-** 125 (57)
54000 480 78 (1980) 3VP54484-** 3VF54484-** 3VS54484-** 3VT54484-** 140 (64)

Features and Benefits

SUPERIOR CHEMICAL RESISTANCE:
  • Materials available for use in most aqueous alkaline solutions, plating solutions and rinse tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION:
  • Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium.

OUTSTANDING PERFORMANCE:
  • Watt densities of 35 watts per square inch (5.4 w/cm2) ensure long service life.

CORROSION RESISTANT HEAD:
  • Vapor resistant, flame retardant polypropylene terminal enclosure with 3-foot (.9m) flexible PVC liquid tight conduit.

SAFETY FEATURES:
  • Grounded construction.
  • Thermal protector built in. Replaceable P2 protector standard for solutions up to 180° F (82° C).
  • Non-floating construction.

CERTIFICATIONS:
  • UL listed (except steel) to U.S. and Canadian safety requirements, and CE.

SIZES:
  • 18,000 watts to 54,000 watts.

VOLTAGES:
  • 240 to 480 volts. Three phase standard, single phase available. Some amperage limitations apply, consult factory.

CONSULT FACTORY FOR THE FOLLOWING:

  • Resettable thermal protectors:
    • P6: for solutions from 180° F (82° C) to 230° F (110° C).
  • Special configurations and lengths.
  • Longer wire and conduit lengths.
  • Lower watt densities for highly viscous solutions.
  • Temperature and level controls sized to match the heater.

We recommend temperature controls and level controls for use with this immersion heater.

Downloads: