Penductor Systems by Filter Pump Industries - Penguin Pump

Penguin Penductor systems are designed for in-tank mixing using the tank fluid as the mixing medium for solution agitation. Simple in design, the Series PES Penductor systems are easy to install, operate, and maintain. Penductors utilize the fluid inside the tank reservoir as the "motive" fluid, which is defined as the fluid flowing through the Penductor nozzle. The high velocity motive fluid entrains the liquid near the suction openings of the Penductor, and mixes this liquid thoroughly as it passes through the diffuser. The resulting plume of mixed fluid, flowing at an intermediate velocity, now proceeds to mix and agitate the remaining tank liquid. The Series PES Penductor systems are completely piped and ready to be attached to the discharge of the motive driving pump.

Features and Benefits:

• Available as Systems with Pumps, Kits or Nozzles Sold Separately
• Deluxe Model Features Adjustable Nozzles
• No Metal to Solution Contact
• Perfect Solution for Large Tanks
• Induces 4 Gallons Extra for Every Gallon Passing Through Nozzle

Product Page:

• Series PES Penductor Systems Product Page

Bulletins (PDF):

• Bulletin 704C - Series PE Penductor Systems
  
  
• Bulletin 310B - Series PES Penductor Systems
  
  
• Series PES Installation Manual
  
  

Penguin Penductor sparging eductors offer a new twist to the current eductor craze. Based on established eductor principles, the Series PE Penductor was designed especially for industrial sparging applications. The nozzle was designed utilizing the same orifice size as a typical 3/8" NPT tank mixing eductor, with a larger connection size, thus giving you the same flow characteristics with less pressure drop. This can reduce the horsepower required on larger systems. The larger connection size allows you to use standard PVC reducing tees without extra bushings or reducing couplings, thus saving you valuable tank space. The diffuser was designed with a larger plume dispersion angle for more uniform agitation and a lower profile to allow you to utilize your tank space more efficiently. The result, the Penductor, a more efficient space-saving eductor made specifically for the surface finishing industry.

Features and Benefits:

• Flows Comparable with Conventional 3/8" Tank Mixing Eductors
• Lower Profile Helps Save Valuable Tank Space and Makes for Easier Retrofits
• Larger Connection Sizes Eliminate Need for Multiple Bushings When Using Standard Fittings or P-Series Pump
• Larger Plume Dispersion Angle Helps Eliminate Dead Spots Between Eductors
• Maximum Temperature 280 °F

Product Page:

• Series PE Penductor Sparging Eductors Product Page

Bulletins (PDF):

• Bulletin 704C - Series PE Penductor Systems