Conductivity Type Liquid Level Controls: LC Series

Model Number	Probe Length (Field Trim) In./(mm)	Probe Shipping Weight Lb./(Kg)
3 ( * ) 6	6 (155)	3 (1.5)
3 ( * ) 12	12 (305)	3 (1.5)
3 ( * ) 18	18 (460)	4 (2)
3 ( * ) 24	24 (610)	6 (2.5)
3 ( * ) 30	30 (762)	7 (3)
3 ( * ) 36	36 (915)	8 (3.5)
3 ( * ) 48	48 (1220)	9 (4)

COMPONENTS PURCHASED SEPARATELY - SPECIFY PROBE MATERIAL:

• S=Stainless Steel.
• H=Hastelloy C®.
• T=Titanium.
• G=Graphite-tipped
• Fluoropolymer (PTFE) covered standard

IMPROVES PROCESS CONTROL:

• Provides automated control and consistent liquid levels in most conductive aqueous processes, waste treatment tanks and when leak detection is required.
• Adds protection against fires and tank damage associated with low-level conditions.
• Dual probe units (LC2): for single point control.
• Multi probe units (LC3): for two-point control and refill/pump down applications.

CORROSION RESISTANT PROBES:

• Fluoropolymer (PTFE) covered: 316 stainless steel, titanium, Hastelloy C® and graphite tipped Hastelloy probe materials.
• Lengths: up to 48 inches (1220mm) standard.
• Field trimmable (except graphite probes).

CORROSION RESISTANT ENCLOSURES:

• Control enclosure: gasketed UL Type 4/4x, IP62 (indoor) polypropylene box with stainless steel hardware.
• Probe enclosure: vapor resistant polypropylene head with 10-foot (3m) flexible lead and quick connect plug for easy connection to remote circuitry.

CERTIFICATIONS:

• cULus and CE.

CAPACITIES:

• Relay rating: 10-amps at 120/208 to 240 volts, 50/60 Hz, single pole, double throw.
• Sensing output: 14.5 VAC.
• Ambient temperature range: 0°F (-18°C) to 104°F (40°C).
• Maximum solution resistance: 70,000 ohm-CM.
• Single phase only.

SAFETY FEATURES:

• Ground connection on circuit board.
• Minimal AC sensing current has no affect on plating processes.

CONSULT FACTORY FOR THE FOLLOWING OPTIONS:

• Probe lengths up to 20-foot (6m).
• Can be pre-wired into combination controls.
• Fluid stilling chambers.
• Longer flexible cords.
• Cord extensions for existing units.
• 4, 5 or 6-probe devices for multiple level control applications.

NOTE:

• Do not use in flammable solutions or in the presence of flammable gases. Not for use in deionized water, oil or other non-conductive solutions.

Downloads:

• Conductivity Type Liquid Level Controls: LC Series information