Process Technology Logo

Distributed by:

CDI Equipment Division logo

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

HX Series, Spiral Fluoropolymer (PTFE) Heaters

HX Series, Spiral Fluoropolymer (PTFE) Heaters
Watts Volts Hot Zone
In./(mm)		 Overall Length
In./(mm)		 Max Cold Zone
In./(mm)		 Model Number Ship Weight
Lbs./(kg)
500 120
240		 5 (125) 11 (280) 41 (1040) HX.5111-**
HX.5211-**		 6 (2.5)
1000 120
240
 7 (180) 11 (280) 41 (1040) HX1111-**
HX1211-**		 7 (3.5)
2000 120
240
480		 12 (305) 17 (430) 40 (1015) HX2117-**
HX2217-**
HX2417-**		 8 (4)
3000 240
480		 16 (405) 23 (585) 40 (1015) HX3223-**
HX3423-**		 13 (6)
4000 240
480		 20 (510) 29 (735) 40 (1015) HX4229-**
HX4429-**		 15 (7)
5000 240
480		 25 (635) 35 (890) 36 (915) HX5235-**
HX5435-**		 18 (8)
6000 240
480		 29 (735) 40 (1015) 30 (760) HX6240-**
HX6440-**		 21 (10)
8000 240
480		 37 (940) 47 (1195) 32 (810) 2HX8247-**
2HX8447-**		 25 (12)
9000 240
480		 44 (1120) 54 (1370) 35 (890)
 2HX9254-**
2HX9454-**		 28 (13)
Single phase only. Heaters in excess of 24 amps may require a non-standard head with 3/4" conduit, please consult factory.

Features and Benefits

SUPERIOR CHEMICAL RESISTANCE:
  • Inert to most aqueous acid, alkaline, anodizing and pickling solutions up to 212°F (100°C).

RUGGED CONSTRUCTION:
  • Heavy wall fluoropolymer (PTFE) covered stainless steel element reduces permeation and eliminates the need for gas purged systems. Guaranteed 100% pinhole free.

SIZES: 500 watts to 9,000 watts.

VOLTAGES::
  • Three voltage ranges available: 120 to 600 volts.
  • Heater is available in single phase only.

CORROSION RESISTANT HEADS: Vapor resistant, flame retardant polypropylene terminal enclosures each with 3-foot (.9m) flexible PVC liquid tight conduits.

OUTSTANDING PERFORMANCE:
  • Low watt density design (10 watts/square inch, 1.5 w/cm2) for long service life.

SAFETY FEATURES:
  • Grounded internal metal element.
  • Thermal protector built in. Replaceable P1 protector standard for solutions up to 180° F (82° C).
  • Non-floating construction.

CERTIFICATIONS: cULus and CE.

CONSULT FACTORY FOR THE FOLLOWING:

  • Resettable thermal protectors:
    • P2: bi-metal switch for solutions up to 180° F (82° C).
    • P8: type-J thermocouple for solutions from 180° F (82° C) to 210° F (99° C).
    • P3: type-J thermocouple for solutions from 210° F (99° C) to 250° F (121° C).
  • Longer vertical lengths (cold zones).
  • Polypropylene guards: recommended for applications up to 180°F (82°C) (sold separately).
  • Fluoropolymer (PTFE) guards: recommended for chromic acid or solutions over 180° F (82° C) (sold separately).
  • Special configurations.
  • Longer wire and conduit lengths.
  • Flexible continuous fluoropolymer leads (P3 protector only).
  • Lower watt densities for highly viscous solutions and technical acids.
  • Temperature and level controls sized to match the heater.

We recommend temperature controls and level controls for use with this immersion heater.

Downloads: