Distributed by:

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

Capacitive Type Liquid Level Controls: ESP Series

IMPROVES PROCESS CONTROL:

• Provides automated control and consistent liquid levels in most conductive aqueous processes, waste treatment tanks and when leak detection is required.
• Adds protection against fires and tank damage associated with low-level conditions.
• ESP model: mounts on the outside of plastic tanks and senses up to .984 inches (25mm), so no direct immersion is required.
• ESPV model: for direct immersion applications (vertically mounted).

CORROSION RESISTANT ENCLOSURE:

• ESP model: housed in a plastic, epoxy encapsulated enclosure with 6-foot (1.8m) flexible cord and mounting flange.
• ESPV model: vapor resistant, CPVC probe enclosure with 3-foot (.9m) flexible PVC conduit.

CERTIFICATIONS:

• CSA certified, UL listed, and CE compliant.

CAPACITIES:

• Field selectable normally open (N/O) or normally closed (N/C).
• 500 mA switch capacity (10 mA minimum).
• Operates on any voltage between 90 and 265 VAC, 50/60 Hz.
• Ambient temperature range: 0°F (-18°C) to 176°F (80°C).
• Single phase only.

CONSULT FACTORY FOR THE FOLLOWING OPTIONS:

• ESPV models available with heavy wall immersion tubes in: CPVC, PVDF, PTFE, and quartz for vertical mounting.
• Custom length immersion tubes for ESPV models.
• Can be pre-wired into combination temperature controls.
• Longer flexible conduits for ESPV devices.
• Threaded wells for through tank wall applications.

Downloads:

• ESP Series, Capacitive Type Liquid Level Control Information
• ESP Series, Capacitive Type Liquid Level Control Installation Manual