Distributed by:
Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology
Digital Combination Controls: DQ Series
| MODEL | VOLTS | MAX AMPS | Repl. Relay | Repl. Trans. | Repl. Sensor | SHIP WT. Lbs./(kg) |
|---|---|---|---|---|---|---|
| C-DQ202 | 240 | 20 | AHD-20-1 | HDD50 2/1 | RTD1000 | 16 (7.3) |
| C-DQ204 | 480 | 20 | AHD-20-1 | HDD50 4/1 | RTD1000 | 16 (7.3) |
| C-DQ302 | 240 | 30 | AHD-30-1 | HDD50 2/1 | RTD1000 | 16 (7.3) |
| C-DQ304 | 480 | 30 | AHD-30-1 | HDD50 4/1 | RTD1000 | 16 (7.3) |
| C-DQ502 | 240 | 50 | AHD-50-1 | HDD50 2/1 | RTD1000 | 17 (7.7) |
| C-DQ504 | 480 | 50 | AHD-50-1 | HDD50 4/1 | RTD1000 | 17 (7.7) |
| C-DQ752 | 240 | 75 | \AHD-75-1 | HD100 2/1 | RTD1000 | 23 (10.4) |
| C-DQ754 | 480 | 75 | AHD-75-1 | HD100 4/1 | RTD1000 | 23 (10.4) |
| C-DQ902 | 240 | 90 | AHD-90-1 | HD100 2/1 | RTD1000 | 25 (11.3) |
| C-DQ904 | 480 | 90 | AHD-90-1 | HD100 4/1 | RTD1000 | 25 (11.3) |
| C-DQ1202 | 240 | 120 | AHD-120-1 | HD100 2/1 | RTD1000 | 27 (12.2) |
| C-DQ1204 | 480 | 120 | AHD-120-1 | HD100 4/1 | RTD1000 | 27 (12.2) |
| C-DQ1502 | 240 | 150 | AHD-150-1 | HDD150 2/1 | RTD1000 | 33 (15) |
| C-DQ1504 | 480 | 150 | AHD-150-1 | HDD150 4/1 | RTD1000 | 33 (15) |
Combination control consists of gasketed plastic enclosure, thermostat, 3 pole contactor transformer.
Features and Benefits
IMPROVES PROCESS CONTROL:- Large (.56” high), easy to read LED display. Two set points (heating and cooling). Provides precise control for consistent plating and etch rates in most aqueous processes.
- Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.
- NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware.
- cULus.
- Large switching capacities from 20 to 150 amps for up to 600 volts.
- Adjustable temperature range from -40°F (-40°C) to 999°F (538°C).
- +/- .25% full span, single digit accuracy.
- 20°F (-7°C) to 140°F (60°C) ambient temperature range.
- Control transformer included.
- Single or three phase.
- Programmable standby temperature setting for overnight control and energy savings.
- Single pole, double throw switch rated at 2 amps for cooling loads.
- Pre-wired P1 terminal blocks.
- Non-volatile memory.
- Programmable high alarm shutdown.
- Programmable high set point limit.
- Sensor short and break protection.
- Security code restricted menu.
CONSULT FACTORY FOR THE FOLLOWING OPTIONS:
- 25-foot (7.6m) and 50-foot (15.2m) sensors.
- Pre-wired outlets for plug-in heaters (some sizes).
- Ground fault protection of Equipment (GFPE) circuitry.
- P2, P3 or P8 thermal protection systems.
- Integrated liquid level control components.
- Front panel mounted digital timers.
- 4-20 mA outputs for process recording.
- Special sensors (required for temperatures above 500°F [260°C]).
- Scalable voltage and current inputs.
- NEMA 4/4X enclosure (with internal heater for outdoor use.)
- Three wire 100-ohm RTD sensors.
Downloads: