Immersion Heaters: Deep Tank, Metal Heater

WATTS	VOLTS	HOT ZONE in./(mm)	LENGTH in./(mm)	PLAIN STEEL Model Number	304 STAINLESS Model Number	316 STAINLESS Model Number	TITANIUM Model Number	SHIP WT. Lbs./(kg)
12000	480	58 (1475)	96 (2440)	P12496-**	F12496--*	S12496--*	T12496--*	37 (17)
12000	480	58 (1475)	120 (3050)	P124120-**	F124120--*	S124120--*	T124120--*	45 (20)
12000	480	58 (1475)	144 (3655)	P124144-**	F124144--*	S124144--*	T124144--*	53 (24)
15000	480	76 (1930)	96 (2440)	P15496-**	F15496--*	S15496--*	T15496--*	37 (17)
15000	480	76 (1930)	120 (3050)	P154120-**	F154120--*	S154120--*	T154120--*	45 (20)
15000	480	76 (1930)	144 (3655)	P154144-**	F154144--*	S154144--*	T154144--*	53 (24)
18000	480	82 (2085)	96 (2440)	P18496-**	F18496--*	S18496--*	T18496--*	37 (17)
18000	480	82 (2085)	120 (3050)	P184120-**	F184120--*	S184120--*	T184120--*	45 (20)
18000	480	82 (2085)	144 (3655)	P184144-**	F184144--*	S184144--*	T184144--*	53 (24)

Three phase available as option. Add a dash before thermal protector designator. Heaters 15,000 watts and higher at 240 volts are available in three phase only.

Features and Benefits

SUPERIOR CHEMICAL RESISTANCE:

Materials available for use in most aqueous alkaline solutions, plating solutions and rinse tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION:

Heavy wall metal sheaths and screw plug available in steel, 304 stainless steel, 316 stainless steel and titanium.

OUTSTANDING PERFORMANCE:

Watt densities of 35 watts per square inch (5.4 w/cm2) ensure long service life.

CORROSION RESISTANT HEAD:

Vapor resistant, flame retardant polypropylene terminal enclosure with 3-foot (.9m) flexible PVC liquid tight conduit.

SAFETY FEATURES:

Grounded construction.
Thermal protector built in. Replaceable P1 protector standard for solutions up to 180° F (82° C).
Non-floating construction.

CERTIFICATIONS:

UL listed (except steel) to U.S. and Canadian safety requirements, and CE.

SIZES:

12,000 watts to 18,000 watts.

VOLTAGES:

240 to 600 volts. Single phase standard, three phase available.

CONSULT FACTORY FOR THE FOLLOWING:

Replaceable thermal protectors:
- P4: for solutions from 180° F (82° C) to 230° F (110° C).
Resettable thermal protectors:
- P2: bi-metal switch for solutions up to 180° F (82° C).
- P6: for solutions from 180° F (82° C) to 230° F (110° C).
Special configurations and lengths.
Longer wire and conduit lengths.
Lower watt densities for highly viscous solutions.
Temperature and level controls sized to match the heater.

We recommend temperature controls and level controls for use with this immersion heater.

Downloads:

Immersion Heaters: Deep Tank, Metal Heater information