Distributed by:

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

Digital Thermostats: DE Series, 1/8 DIN

Features and Benefits

IMPROVES PROCESS CONTROL:

• Large (.56” high), easy to read LED display.  Provides precise control for consistent plating and etch rates in most aqueous processes.

TEMPERATURE SENSOR:

• Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control.  Provides extended service in corrosive liquids and can be lengthened with ordinary copper hookup wire.

CORROSION RESISTANT ENCLOSURE:

• Vapor resistant, NEMA 12, IP55, gasketed 1/8 DIN plastic enclosure with sealed tactile switches and stainless steel hardware.

CERTIFICATIONS:

• cULus and CE.

CAPACITIES:

• Single pole, double throw switch rated at 20-amps for either 120 or 240 volts.
• Adjustable temperature range from -40°F (-40°C) to 999°F (538°C).
• +/- .25% full span, single digit accuracy.
• 20°F (-7°C) to 130°F (54°C) ambient temperature range.
• Universal power supply: 85-265 VAC, 50 or 60 Hz.
• Single phase only.

SAFETY FEATURES:

• Non-volatile memory.
• Programmable high alarm shutdown.
• Programmable high set point limit.
• Sensor short and break protection.
• Security code restricted menu.

CONSULT FACTORY FOR THE FOLLOWING OPTIONS:

• 25-foot (7.6m) and 50-foot (15.2m) sensors.
• Combination controls available for three phase service and larger heater loads.
• Three wire 100-ohm RTD sensors.
• Special sensors required for temperatures above 500°F (260°C).
• Scalable voltage and current inputs.
• Convertible to direct acting output for cooling applications.
• Adaptor panels for control retrofits.
• Plastic enclosures for wall mounting.

Downloads:

• DE Series, Digital Thermostat Information