Flo King Lab Series Filter Systems
Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology
Flo King offers several pump models, as shown below. The flow rate is given in gph (gallons per hour) and LPH (liters per hour).
These units can be used as filter systems (with cartridges attached) or just as pumps (without filter cartridges). All employ the same principle of
operation and can be used to pump, filter, agitate, and carbon treat.
Selection should be based on a variety of considerations, including: tank size; degree of agitation desired; available space in tank; clearance
above tank; temperature; and chemical composition.
Please call for accesories or special applications.
Flo King Lab Series Filter Systems
Description:
- For laboratory, prototype and clean production operations in tanks smaller than 10 gallons (38 liters). Popular for precious metals plating and a
host of applications in the electronics and decorative fields. Maximum flow rate is 400 gph (1500 LPH), depending on filter cartridges and attachments selected.
Pump:
- Standard unit is made of polypropylene with 303 stainless steel shaft covered with Teflon shrink tubing. Pump also available on special-order
basis in PVDF (Kynar) and stainless steel. Titanium shaft available as special-order item on certain body lengths for solutions that
aggressively attack stainless steel.
Flow Rate:
- Up to 400 gallons (1500 liters) per hour at 60 Hz. A flow-rate reduction of about 18% is typical when operating at 50 Hz.
Pressure:
- Very little head pressure. Not intended for solution transfer.
Weight:
- About 3 pounds (1.3 kg) in polypro, depending on pump body length.
Motor:
- 1/70th horsepower (11 watt), 115 V, 50/60 Hz, 2600/3000 RPM, 0.96 A
- 1/70th horsepower (11 watt), 230 V, 50/60 Hz, 2600/3000 RPM, 0.48 A. Thermally Protected.
- Electrical cord is 10 feet (3 meters) long.
Downloads:
